# Conversion of an octal number to its decimal equivalent

To express the value of a given octal number as its decimal equivalent, add the octal digits after each digit has been multiplied by its associated weight.

**Frequently Asked Questions**

+

Ans: To convert from decimal whole numbers to octal, the
systematic approach called the repeated-division-by-8
method is used. This method is explained by the following
Converting (359)10 to octal.
(a) Divide the decimal number by eight and obtain a quotient and a
remainder.
(b) Divide the quotient by eight and obtain a new quotient and a
remainder.
(c) Repeat step (b) until the quotient is equal to zero (0).
(d) The first remainder produced is the LSB in the octal number and
the last remainder (R) is the MSB. Accordingly, the octal number
is then written (from left to right) with the MSB occurring first. view more..

+

Ans: To convert a hexadecimal to decimal, begin by multiplying
each of the hexadecimal digits by their positional weight
values as expressed in decimal. Then the resulting values are
added to obtain the value of the decimal number.
view more..

+

Ans: Table 2.1 Number systems, bases, and symbols
Number system Base Digital symbols
Binary 2 0, 1
Ternary 3 0, 1, 2
Quaternary 4 0, 1, 2, 3
Quinary 5 0, 1, 2, 3, 4
Octal 8 0, 1, 2, 3, 4, 5, 6, 7
Decimal 10 0, 1, 2, 3, 4, 5, 6, 7, 8, 9
Duodecimal 12 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B
Hexadecimal 16 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F
Vigesimal 20 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F, G, H, I, J view more..

+

Ans: To express the value of a given octal number as its decimal
equivalent, add the octal digits after each digit has been
multiplied by its associated weight. view more..

+

Ans: A binary number is made of 0s and 1s. In the binary number system
only two symbols, 0 and 1, are used to represent numeric values. The
symbol “0“ represents the value “zero” while the symbol “1” represents
the value “one”. Since there are only two symbols in the binary number
system, the value “two” is represented by placing the symbol “1” on
the left–hand side of the symbol “0” resulting in the binary equivalent
“10”. Next, the value “three” is represented by “11” in the binary number
systemby replacing the “ 0 ” in “10” by the next higher value symbol “1”. view more..

+

Ans: The abbreviated form of “ bi-nary dig-it ” is known as bit. When a “bit” is
mentioned, it means a single binary digit, which may either be a “0” or
“1”, is referred to. view more..

+

Ans: All modern computers use semiconductor memory as primary
memory. One of the important semiconductor memories used
in desktop computers is Random Access Memory (RAM).
Here “random access” means that any storage location can be
accessed (both read and write) directly. view more..

+

Ans: Secondary Memory And Secondary Storage Devices view more..

+

Ans: There are four main types of secondary storage devices
available in a computer system:
Disk drives
CD drives (CD-R, CD-RW, and DVD)
Tape drives
USB flash drives view more..

+

Ans: Cache memory It is a special high-speed memory that allows a microprocessor
to access data more rapidly than from memory located elsewhere
on the system board.
view more..

+

Ans: A microprocessor is an integrated circuit chip that contains all of
the essential components for the central processing unit (CPU) of a
microcomputer system.
view more..

+

Ans: 1’s complement A number system that was used in some computers
to represent negative numbers. To form 1s complement of a number,
each bit of the number is inverted which means zeros are replaced with
ones and ones with zero. view more..

+

Ans: 1’s complement A number system that was used in some computers
to represent negative numbers. To form 1s complement of a number,
each bit of the number is inverted which means zeros are replaced with
ones and ones with zero. view more..

+

Ans: 2’s complement A number formed by adding 1 to the 1’s compliment
of a number. The 2’s complement representation has become the standard
method of storing signed binary integers. It allows the representation
of an n-bit number in the range – 2n to 2n-1, and has the significant
advantage of only having one encoding for 0.
view more..

+

Ans: A Boolean or logic expression is a logic variable or a number
of logic variables involved with one another through the
logical operations ‘.’, ‘+’, and ‘–’. view more..

+

Ans: The AND gate is an electronic circuit that has two or more
inputs and only one output. It gives a HIGH output (1) only
if all its inputs are HIGH. view more..

+

Ans: The OR gate is an electronic circuit that has two or more
inputs and only one output. It gives a HIGH output if one or
more of its inputs are HIGH. view more..

+

Ans: NOT GATE also called INVERTER.The inverter is a little different from AND and OR gates as
it has only one input and one output. Whatever logic state
is applied to the input, the opposite state will appear at the
output.
The NOT function is denoted by a horizontal bar over the
value to be inverted. view more..

## Recommended Posts:

- What is a Computer ?
- Introduction - What Is A Computer
- Evolution Of The Computer- A Brief History
- Generations Of Computers
- Classification Of Computers
- Anatomy Of A Computer
- Memory Revisited
- What is Operating System And How It Loads
- Operational Overview Of CPU
- Introduction To Number System
- Base Of A Number System
- Basic Internet Terminology, Types Of Internet Connections, Uses And Hazards Of Internet
- COMPUTER FUNDAMENTALS AND PROGRAMMING IN C
- COMPUTER FUNDAMENTALS AND PROGRAMMING IN C
- COMPUTER FUNDAMENTALS AND PROGRAMMING IN C

Rating -

**3/5**Advertisements